PROSAFE 10-PORT GIGABIT SMART SWITCH WITH 2 DEDICATED GIGABIT SFP PORTS

• Dedicated Fiber Uplink
• Traffic Management
• Advanced Security with 802.1x and ACL
• Auto Voice and Auto Video
• Centralized Management via the New Smart Control Center

Intelligent switch in a compact form factor for optimized utilization and efficiency

The NETGEAR^® family of ProSafe^® Gigabit Smart Switches is purposely designed for SMB customers with high performance, SMB-oriented features and easy management. With 8 10/100/1000 Mbps ports, each capable of powering 2000 Mbps of data throughput in full-duplex mode per port and two dedicated Gigabit SFP ports for fiber uplinks with greater distance and better security, the GS110T is an ideal solution for extending network connections into conference room, labs, lobbies and department workgroups. The GS110T comes with a comprehensive set of features, such as access control lists (ACL), 802.1x port authentication, enhanced QoS, rate limiting and IGMP snooping among others to provide a small or medium-sized business with a network that is geared for growth while ensuring performance and reliability.

The GS110T comes with an intuitive, Web-browser interface which offers simple Smart Switch management, making it a snap to monitor switch performance, configure ports, even set up port trunks, VLANs, and traffic prioritization.

GS110T is packed with powerful features capable of enhancing any type of business network. Like all NETGEAR ProSafe Smart Switches, the GS110T is backed by the NETGEAR ProSafe Lifetime Warranty†, and 1-Year ProSupport Lifetime 24x7 Advanced Technical Support*.

 

Features	Benefits
Dedicated Fiber Uplink	Directly connects to FTTx networks. Used in fiber networks for better security and reliability
Traffic Management	Prioritize traffic to ensure quality of latency-sensitive services and applications despite increasing traffic loads
Advanced Security with 802.1x and ACL	User-based authentication and added filtering to permit or deny traffic based on MAC or IP addresses
Auto Voice and Auto Video	Assist customers to easily set up VoIP or IP surveillance networks with a couple of simple steps
Centralized Management via the New Smart Control Center	Discover all the Smart Switches in the network, configure them from a central location; schedule mass configuration and firmware uploads

 

Specifications:

Network Protocol and Standards Compatibility

• IEEE 802.3 10BASE-T
• IEEE 802.3u 100BASE-TX
• IEEE 802.3ab 1000BASE-T
• IEEE 802.3z 1000BASE-X
• IEEE 802.3x full-duplex flow control

Power Supply

• Power consumption: 8.5W
• 12V/1A external power adapter

Network Ports

• 8 10/100/1000 Mbps auto sensing Gigabit Ethernet

Physical Specifications

• Dimensions:(W x D x H) 236 x 101 x 27 mm (9.29 x 3.97 x 1.06 in)
• Weight: 0.69 kg (3.7 lb)

Electromagnetic Emissions

• CE EN 55022, EN 61000 and EN 55024
• FCC Part 15 Class B
• VCCI Class B
• C-Tick

Environmental Specifications

• Operating temperature: 32° to 122° F (0° to 50° C)
• Storage temperature: -4° to 158° F (-20° to 70° C)
• Operating humidity: 90% maximum relative humidity, non-condensing
• Storage humidity: 95% maximum relative humidity, non-condensing
• Operating altitude: 10,000 ft (3,000 m) maximum
• Storage altitude: 10,000 ft (3,000 m) maximum

LEDs

• Per port: (10/100 and Gigabit): Link/activity, speed
• Per device: Power

Safety

• CE mark, commercial
• CE EN 60950-1
• CCC
• CB
• KCC

System Requirements

• Category 5 UTP Network cables or above
• Network card for each PC
• Network software (e.g., Windows^®)
• Web browser (e.g., Internet Explorer 6.0 or higher, Netscape 6.0 or higher)

Administrative Switch Management

• IEEE 802.1Q static VLAN (64 groups, static)
• IEEE 802.1p Class of Service (CoS)
• Port-based QoS
• DSCP-based QoS
• DiffServ
• IEEE802.3ad Link Aggregation (manual or LACP)
• IEEE 802.1D Spanning Tree Protocol (STP)
• IEEE 802.1w Rapid Spanning Tree Protocol (RSTP)
• IEEE 802.1s Multiple Spanning Tree Protocol (MSTP)
• IEEE 802.1ab Link Layer Discovery Protocol (LLDP)
• SNMP v1, v2c, v3
• RFC 1213 MIB II
• RFC 1643 Ethernet Interface MIB
• RFC 1493 Bridge MIB
• RMON group 1, 2, 3, 9
• RFC 2131 DHCP client
• Voice VLAN
• Auto-VOIP
• DHCP Filtering
• Auto denial-of-service (DoS) protection
• HTTP and HTTPS
• Ping and traceroute
• Power saving when link down
• IEEE 802.1x
• Port-based security by locked MAC addresses
• IP and MAC ACL
• Storm control for broadcast, multicast and unknown unicast packets
• IGMP snooping v1/v2/v3
• Protected Port
• Port-based ingress and egress rate limiting
• SNTP
• Port mirroring support (many to one)
• Web-based configuration
• Configuration backup/restore
• Password access control
• RADIUS Support
• TACACS+ support
• Syslog
• Firmware upgradeable

Performance Specifications

• Forwarding modes: Store-and-forward
• Bandwidth: 20 Gbps
• Network latency: Less than 4 nanoseconds for 64-byte frames in store-and-forward mode for 1000 Mbps to 1000 Mbps transmission
• Buffer memory: 512 KBytes per system
• Address database size: 4,000 media access control (MAC) addresses per system
• Addressing: 48-bit MAC address
• Mean time between failure (MTBF): 472,147 hours at 25C (~54 years)
• Acoustic noise: 0

Modules

• AGM731F 1000BASE-SX SFP Module
• AGM732F 1000BASE-LX SFP Module
• AGM733 1000BASE-ZX SFP Module

Warranty and Support

• ProSafe Lifetime Warranty†
• ProSupport 24x7 Advanced Technical Support, 1 year (included)*

ProSupport™ Service Packs Available

• XPressHW, Category 1: PRR0331 (3-year next-business day hardware replacement contract)
• OnCall 24x7, Category 1: PMB0331 (3-year Advanced Technical Support contract, including Remote Diagnostics performed by our technical experts for prompt resolution of technical issues, and next-business day hardware replacement)

Package Contents

• ProSafe^® 8-port Smart Switch with 2 Gigabit SFP Ports (GS110T)
• Rubber footpads
• 12V/1A external power adapter
• Wallmount kit
• Resource CD
• Installation guide